Stainless steel four edge rough milling cutter-DMV4 series
It is suitable for rough milling stainless steel and other difficult materials at high and medium speeds.
- Description
- Inquiry
Stainless steel four edge rough milling cutter-DMV4 series
| It is suitable for rough milling stainless steel and other difficult materials at high and medium speeds. | |||||||||||||||||||||||||||||||||
| Tool material: Cemented carbide (tungsten steel) | Coating: AE | ||||||||||||||||||||||||||||||||
| Size | CED | CEL | SHK | OVL | Order No | ||||||||||||||||||||||||||||
| DMV4040450 | 4.0 | 12 | 4 | 50 | DMV-04 | ||||||||||||||||||||||||||||
| DMV4040475 | 4.0 | 15 | 4 | 75 | DMV-04A | ||||||||||||||||||||||||||||
| DMV40404100 | 4.0 | 20 | 4 | 100 | DMV-04B | ||||||||||||||||||||||||||||
| DMV4050550 | 5.0 | 13 | 5 | 50 | DMV-05T | ||||||||||||||||||||||||||||
| DMV4050650 | 5.0 | 13 | 6 | 50 | DMV-05 | ||||||||||||||||||||||||||||
| DMV4060650 | 6.0 | 15 | 6 | 50 | DMV-06 | ||||||||||||||||||||||||||||
| DMV4060675 | 6.0 | 20 | 6 | 75 | DMV-06A | ||||||||||||||||||||||||||||
| DMV40606100 | 6.0 | 30 | 6 | 100 | DMV-06B | ||||||||||||||||||||||||||||
| DMV40606150 | 6.0 | 35 | 6 | 150 | DMV-06C | ||||||||||||||||||||||||||||
| DMV4080860 | 8.0 | 20 | 8 | 60 | DMV-08 | ||||||||||||||||||||||||||||
| DMV4080875 | 8.0 | 25 | 8 | 75 | DMV-08A | ||||||||||||||||||||||||||||
| DMV40808100 | 8.0 | 35 | 8 | 100 | DMV-08B | ||||||||||||||||||||||||||||
| DMV40808150 | 8.0 | 40 | 8 | 150 | DMV-08C | ||||||||||||||||||||||||||||
| DMV4101075 | 10.0 | 25 | 10 | 75 | DMV-10 | ||||||||||||||||||||||||||||
| DMV41010100 | 10.0 | 40 | 10 | 100 | DMV-10B | ||||||||||||||||||||||||||||
| DMV41010150 | 10.0 | 55 | 10 | 150 | DMV-10C | ||||||||||||||||||||||||||||
| DMV4121275 | 12.0 | 30 | 12 | 75 | DMV-12 | ||||||||||||||||||||||||||||
| DMV41212100 | 12.0 | 45 | 12 | 100 | DMV-12B | ||||||||||||||||||||||||||||
| DMV41212150 | 12.0 | 60 | 12 | 150 | DMV-12C | ||||||||||||||||||||||||||||
| DMV41414100 | 14.0 | 45 | 14 | 100 | DMV-14 | ||||||||||||||||||||||||||||
| DMV41414150 | 14.0 | 60 | 14 | 150 | DMV-14C | ||||||||||||||||||||||||||||
| DMV41616100 | 16.0 | 45 | 16 | 100 | DMV-16 | ||||||||||||||||||||||||||||
| DMV41616150 | 16.0 | 70 | 16 | 150 | DMV-16C | ||||||||||||||||||||||||||||
| DMV41818100 | 18.0 | 45 | 18 | 100 | DMV-18 | ||||||||||||||||||||||||||||
| DMV41818150 | 18.0 | 70 | 18 | 150 | DMV-18C | ||||||||||||||||||||||||||||
| DMV42020100 | 20.0 | 45 | 20 | 100 | DMV-20 | ||||||||||||||||||||||||||||
| DMV42020150 | 20.0 | 70 | 20 | 150 | DMV-20C | ||||||||||||||||||||||||||||
Xingxin Longteng technology specialty manufactures and supplies a full line of both and custom leather cutting knives and blades, Has beenknown in manufacturing of carbide knives and blades for ten years.
All of our standard leather cutting knives are manufactured to exceed the exact OEM standards.
Company Information
10 years of experience in the manufacture of industrial blades
Blade dispenser enables blades to be safely removed individually
Customer-specific livery possible and indidual packaging supper sharpness and long cutting life
Single-sided and double-sided blades are available
Materials and hard coating to customer specification
Related Products
Read MoreQuick ViewReinforced purpose four edge rough skin milling cutter-DPVX4 series
Reinforced purpose four edge rough skin milling cutter DPVX4 series is suitable for high and medium speed rough milling of alloy steel, Die steel and pre hardened steel below HRC50 degrees.
It has higher accuracy and service life than the general model.
Read MoreQuick ViewDeep groove double edge milling cutter-DPEL series
It is applicable to the deep groove processing of general steel and iron parts.
Read MoreQuick ViewGeneral purpose four edge round nose milling cutter-DPR4 series
It is suitable for high and medium speed processing of alloy steel, Die steel and pre hardened steel below HRC50 degrees.
Read MoreQuick ViewReinforced purpose four edge milling cutter-DPEX4 series
Unequal tooth pitch, Suitable for high and medium speed machining of alloy steel, Die steel and pre hardened steel below HRC50 degrees.
It has higher accuracy and service life than the general model.
Read MoreQuick ViewReinforced purpose double edge milling cutter-DPEX2 series
Unequal tooth pitch, suitable for high and medium speed machining of alloy steel, Die steel and pre hardened steel below HRC50 degrees.
It has higher accuracy and service life than the general model
Read MoreQuick ViewGeneral purpose round nose milling cutter with long neck and short edge and four edges-DPRL4 series
The design of long neck and short blade is suitable for deep cavity cleaning and machining of common materials such as carbon steel, Alloy steel and prehardened steel.
Read MoreQuick ViewReinforced purpose four edge round nose milling cutter-DPRX4 series
It is suitable for high and medium speed processing of alloy steel, Die steel and pre hardened steel below HRC50 degrees.
It has higher accuracy and service life than the general model.
Read MoreQuick ViewGeneral purpose four edge rough skin milling cutter-DPV4 series
Suitable for high and medium speed rough milling of alloy steel, Die steel and pre hardened steel below HRC50.
Read MoreQuick ViewReinforced purpose double-edged ball cutter-DPBX2 series
It is suitable for high and medium speed processing of alloy steel, Die steel and pre hardened steel below HRC50 degrees.
It has higher accuracy and service life than the general model.
Read MoreQuick ViewGeneral purpose double-edged ball cutter-DPB2 series
It is suitable for high and medium speed processing of alloy steel, Die steel and pre hardened steel below HRC50 degrees.
